2008/10/15
HP rx8640 使用串口连接MP口进行日志收集
今天发现HP主机面板上的cell1在闪黄灯，检查系统日志没有发现有告警信息。这时需要在MP上进行日志收集。在MP上进行日志收集步骤如下：
1.先用串口线连接MP口
2.打开超级终端，选com1,设置选“还原默认值”设置如下：
http://blufiles.storage.msn.com/y1pq9bGWB_foMcEQxyyUnWmRR3_bit2R6ypaQjXoKh2gs9r54TJhPYA3E7GTRzVhJUo?PARTNER=WRITER
3.连接后会提示MP Loing，输入帐号密码 Admin / Admin （注意在超级终端的 传送-》捕获文字 来保存你的信息到文件上）
3.MP登录后系统会提示“Console Login” ，这时直接按 CTRL+b就进到MP的模式了
4.进入MP模式后会看到菜单：
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
FW: Firmware Update
HE: Help
X: Exit Connection
5.选 SL 进入，会有子菜单：
[mp] MP> SL
EVENT LOG MENU:
FPL: Forward Progress Log
SEL: System Event Log
LIVE: Live Events
CLR: Clear FPL and SEL
Q: Quit
6.选 SEL ,进入下一级
[mp] MP:VW> SEL
Welcome to the SEL (System Event Log) Viewer
The following SEL navigation commands are available:
D: Dump log starting at current block for capture and analysis
F: Display first (oldest) block
L: Display last (newest) block
J: Jump to specified entry and display previous block
+: Display next (forward in time) block
-: Display previous (backward in time) block
?: Display help ^B: Exit viewer The following event format options are available: K: Keyword R: Raw hex T: Text The following event filter options are available: A: Alert level C: Cell U: Unfiltered [mp] MP:VWR ( 选D. 1524 MP 0 2 44800ee800e00001 00ffffffff01ff68 CELL_OFF 1524 08/15/2007 04:14:00 1525 MP 0 2 44800ee800e00003 00ffffffff00ff68 CELL_OFF 1525 08/15/2007 04:14:00 1526 MP 0 2 448019db00e00005 000001ffffffff69 IOBP_OFF ...... 然后再选 T [mp] MP:VWR ( Switching to text format. 然后按Enter或是Space会列出日志信息 [mp] MP:VWR ( Log Entry 1827: 10/10/2008 09:43:37 Alert level 2: Informational Keyword: CACHE_CHECK_INFO It indicates a cache error occurred and data field contains check info data. Reporting Entity: System Firmware located in cabinet 0, slot 1, cpu 1 Problem Detail: 0x188019d500090521 0x4e801c9f11e00228 0x188019d500090521 0x4b001c9f11e00229 0x0100000048ef23c9 Log Entry 1826: 10/10/2008 09:43:37 Alert level 2: Informational Keyword: MC_TIMESTAMP MC: MC timestamp Reporting Entity: System Firmware located in cabinet 0, slot 1, cpu 1 Implementation Dependent: 0x2008101000100305 0x568002b011e00226 0x2008101000100305 0x4b0002b011e00227 0x0100000048ef23c9 7.输入 ctrl+b ,然后再 q，回到主菜单： MP MAIN MENU: CO: Consoles VFP: Virtual Front Panel CM: Command Menu CL: Console Logs SL: Show Event Logs FW: Firmware Update HE: Help X: Exit Connection 再入 CM ,输入 ps 查看状态信息 mp] MP:CM> ps Display detailed status of the selected MP bus device. The following MP bus devices were found: +---+----+-----+-------+-------+-----------+ | | | | | | | | | | Sys | | IO | Bulk Pwr | |Cab| MP |Bkpln| Cells |Chassis| Supplies | | # |M S| |0 1 2 3| 0 1 |0 1 2 3 4 5| +---+----+-----+-------+-------+-----------+ | 0 |* *| * |* * | * * |* * * * | +---+----+-----+-------+-------+-----------+ You may display detailed power and hardware status for the following items: T - Cabinet S - System Backplane G - MP (Core I/O) P - IO Chassis C - Cell Select Device: c Enter cell number: 1 HW status for Cell 1 : FAILURE DETECTED Power status : on, 1.8V VRM4 VOLTAGE FAULT Faults above are latched. They are cleared just before the cell is powered on. Boot is not blocked PDH memory is shared Processor Compatibility : OK RIO cable status : connected RIO cable connection physical location : PCI Domain 1 Core cell is cell 0 Attention Led is off PDHC status Leds : ***- CPU Module Slot 0 1 2 3 Populated P P P P Local 48V Good * * * * Power Enabled * * * * Power Good * * * * (* - True, P - Processor, T - Terminator) | DIMM Presence | | | | Side: | A | B | |Echelon: |01234567|01234567| +---------+--------+--------+ | |**** **** | 1 1 1 1 1 1 VRM's 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 Present : * * * * * * * * * * * * * * * * Enabled : * * * * * * * * * * * * * * * * Pwr Good : * * * * * * * * * * * * * * * Front Side Bus Freq. : 267 MHz CPU Core Freq. : 1600 MHz CPU Part Number : 80549KE System Boot Rom (SFW) firmware rev 007.048.000 PDH controller (PDHC) firmware rev B.023.003.033 built MON JAN 08 19:59:34 2007 [mp] MP:CM> ps Display detailed status of the selected MP bus device. The following MP bus devices were found: +---+----+-----+-------+-------+-----------+ | | | | | | | | | | Sys | | IO | Bulk Pwr | |Cab| MP |Bkpln| Cells |Chassis| Supplies | | # |M S| |0 1 2 3| 0 1 |0 1 2 3 4 5| +---+----+-----+-------+-------+-----------+ | 0 |* *| * |* * | * * |* * * * | +---+----+-----+-------+-------+-----------+ You may display detailed power and hardware status for the following items: T - Cabinet S - System Backplane G - MP (Core I/O) P - IO Chassis C - Cell Select Device: t HW status for rx8640 cabinet : FAILURE DETECTED Master/Slave failover is Enabled Power switch is on Right Door is closed Top Door is closed Left Door is closed Total Power Available 4000 VA Total Power Needed 2507 VA Power Redundancy : redundant Power Viability : viable Power Status ---------------+-----+-------+-------+-----------+ | | | | | | Sys | | IO | Bulk Pwr | |Bkpln| Cells |Chassis| Supplies | | |0 1 2 3| 0 1 |0 1 2 3 4 5| ---------------+-----+-------+-------+-----------+ Populated | * |* * | * * |* * * * | Enabled | * |* * | * * |* * * * | Power OK | * |* * | * * |* * * * | Warning/Fault | | * | | | Attention LED | | | | | AC Line status: Line A0 NOT PRESENT Line B0 Present Line A1 Present Line B1 Present -- Press Front Fan Speed : normal Rear Fan speed : normal I/O Bay Fan Speed : normal Temperature state : normal Main Fan Redundancy : redundant I/O Fan Redundancy : redundant Overtemp Shutdown Enabled | BPS | PCI | | Fans | Fans | | 0 1 2 3 4 5 | 0 1 2 3 4 5 | +-----------+-------------+-------------+ Populated | * * * * | * * * * * * | Failing | | | Failed | | | | Standby/Main Fans | 1 1 1 1 1 1 1 1 1 1 2 | | 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 | +-----------+-------------------------------------------+ Populated | * * * * * * * * * * * * * * * * * * * * * | Failing | | | Failed | | | Cell Fans | | CPU C | | 0 1 2 3 C | +-----------+------------+ Cell 0 | | Populated | * * * * * | Failing | | Failed | | Cell 1 | | Populated | * * * * * | Failing | | Failed | | 8.输入 x ,x 退出 9.发日志发给HP工程师处理。 因篇幅问题不能全部显示，请点此查看更多更全内容